When you build a house, you have to be ready to stand by with all the rooftop issues you should know. Not all homes will be fine as time goes by, you must have some standby attitude that will help you in settling the problem in your home, one of the problems is the roofing problem. This will be of particular concern to you, the root problem you should know is that your roof is too gentle. The roof repair that is too sloping will cause the rain to fall slowly. This situation will cause water to gather in the concrete and will seep on the ceiling. The roof slope factor is the cause. The solution is the slope of the roof should be ideal that is 30 to 40 degrees. Ideal slope roof size will make the rainfall quickly and will not seep on the ceiling. Conversely, if the roof is too steep then the tile will easily degenerate.
The extreme weather became one of the reasons why the roof leaked. Notice each ridge, roof shape encounter, and gutters. To avoid broken roofs and cracked cement. You can coat the tile, ridge, and gutter with waterproof. Alert, porous roof frame. Seepage of water dripping from the sidelines of tile and gutters became one of the reasons why the roof truss can porous. The solution is to replace the roof truss if the damage is severe, for example, most of the porous cotton. However, if the damage is only a small part of the rafters and battens, you can repair the damaged part only. Roof slump is also a case that you should be aware of because the slope of the roof becomes the main cause. Clay tiles are designed for angles 27.5 – 40 degrees. If the installation does not fit the right angle, it will be the water entrance. Preferably, the angle of the roof made ramps around 30 to 40 degrees or fewer no problem. Then each tile should be nailed to the battens that are just below it so as not to easily sag.
Continuous heat and cold changes will make no fine cracked concrete. However, even the slightest crack will make water enter. The problem can be solved by considering the composition of the concrete mix and the casting process because these two things determine the quality of the concrete. If cracks have already occurred, use waterproof on the entire roof surface.